Aerospace Products

WATCH PRODUCT VIDEO

Download

AEROSPACE PRODUCTS

As an industry with one of highest degrees of sophistication and technological investment, it is reasonable to expect the same from your suppliers. That's why Intertape's highly engineered products are an out of this world fit for the aerospace industry. The assortment of masking tapes, fine line products and blast tapes are second to none in performance. Intertape's technical adhesive systems along with high elongation substrates make for an excellent combination in masking tape design. Don't wing it, use Intertape for all aerospace applications.

FM71

PVC backed; rubber based; fine line masking tape; removes cleanly from a variety of surfaces when exposed to temperatures up to 250°F/120°C for at least 30 minutes

FM-35

Fineline Masking Tape - Preferred for medium to high temperature applications where a sharp, fine line is required including composite and fiberglass (gelcoat) fabrication.

HMF

http://intertapepolymer.com/PublishingImages/industrialnewcore/IND_SPC_HMF_IMG.jpg

Anchor® brand Hand Mask is a pre- folded high density polyethylene masking film designed for multiple transportation applications. The thick and durable 12 micron film is treated to resist overspray flaking during paint applications. This special film is designed with a reinforced top edge formulated to prevent the underlying film from sticking.

PG20

PG20 is an aluminized silver, crepe backed painter's tape that removes cleanly up to 30 days after application even when exposed to high temperature and UV rays.

PT14

PT14 is a blue, pressure-sensitive masking tape designed for the most demanding professional painters. With its fine-structured crepe backing, it provides excellent paint lines, cornering, and unsurpassed conformability. This premium painters’ tape will remove cleanly for up to 14 days, even with direct exposure to sunlight and high humidity. Typical applications include outdoor masking of woodwork, glass and metal surfaces, and marine painting applications.

519

http://intertapepolymer.com/PublishingImages/industrialnewcore/IND_GENPERMSK_IMG.jpg

519 has a solvent cast natural and synthetic rubber blend platform that adheres securely to many surfaces.

PG415

PG415 is a General Grade masking tape has a very conformable backing and an aggressive adhesive for non-critical securing and bundling applications.

Orange Mask

Orange Mask™ is a high performance masking tape developed for transportation related paint applications such as marine, bus, truck, RV, automotive and various other applications where conformability and clean removal is required. Crisp paint lines. UV resistant up to 72 hours. Tear, moisture and solvent resistant.

ALF-200L

http://intertapepolymer.com/PublishingImages/industrialnewcore/IND_DCT_GENPURPFOIL_IMG.jpg

ALF-200L is engineered and designed for general purpose seaming, patching and sealing to enhance appearance and maintain vapor barrier integrity. The aggressive / long-lasting acrylic pressure-sensitive adhesive provides long-lasting adhesion to clean/dry surfaces. Flame retardant / High shear adhesion / UV resistant. Superior bonding when exposed to either sub-zero or elevated temperatures. Release coated kraft liner. For (limited) use in Industrial, Appliance, Marine and Aerospace industries. Can also be used as protective mask during chemical stripping of metals / other surfaces. Conforms to UL723.

ALF-300L

3.0 mil dead soft aluminum foil with aggressive pressure-sensitive acrylic adhesive. Used in HVAC (Heating, Ventilation, and Air Conditioning), Aerospace, Industrial, Marine and Appliance industry applications.

ALF-300

Engineered to meet requirements for masking of aircraft surfaces during chemical paint stripping process. Aggressive acrylic pressure-sensitive adhesive provides instant, water-resistant adhesion to clean / dry surfaces. Adheres well to itself (where overlapped) yet dispenses from the roll for easy application. Remains flexible and resists cracking and lifting. Conforms to irregular / curved surfaces. Can also be used for electroplating, heat reflection/dissipation and to seam and seal fiberglass duct board, sheet metal ductwork, and flexible duct wrap to enhance appearance and maintain vapor barrier integrity. Recommended minimum application temperature: 35ºF. Also can be used for electroplating (of aluminum), HVAC (Heating, Ventilation, and Air Conditioning) and other Aerospace, Industrial, Marine and Appliance industry applications.

PG505

A paint contractor industry staple! Its high elongation will conform to most painting applications.

PS1

http://intertapepolymer.com/PublishingImages/industrialnewcore/IND_FLB_PS1_IMG.jpg

PS1 is a high strength flatback containing an adhesive to withstand temperature exposure up to 400°F/205°C

AC30

http://intertapepolymer.com/PublishingImages/industrialnewcore/IND_GENDCT1_IMG.jpg

Rubber blend adhesive system that bonds to almost any surface. Excellent conformability; terars straight. Water-resistant. UL723 rated for flame and smoke.

591

http://intertapepolymer.com/PublishingImages/AER_591_IMG.jpg

This heavy duty, double-coated flatback tape has become a standard for golf grip repair. It is also ideal for photograph mounting, carpet installation and textile manufacturing.

AC50

This premium grade duct tape is designed to perform best when a significant level of tensile and tear strength are required. Excellent moisture barrier. Meets ASTM D5486 Type 1. Available in silver, black, and olive drab.

PG5

Recognized as the premium painter’s tape worldwide; smooth textured backing provides for easy application and clean, crisp paint lines

PG56

This premium grade tape is temperature resistant to 225°F/107°C for use in any medium temperature automotive application.

PG21

This extremely versatile tape is resistant to strong solvents and paints and is easily removed in warm or cold environments. It is temperature resistant to 325°F/163°C.

PG21A

PG21A is temperature resistant to 325°F/163°C and can be SME-AMS-T-21595 certified. It is resistant to strong solvents, paints and tearing and has controlled unwind.

LA-26

Combining the moisture, chemical, abrasion and puncture resistance of polyester film with the machine direction strength and dimensional stability of rope-fiber paper backing, this pressure sensitive adhesive is designed for use in high temperature conditions. It is ideal for tabbing, holding and wrapping, masking PCB gold fingers during wave solder and HAL operations. It can also be used for 'powder coat' masking.

FBL100

http://intertapepolymer.com/PublishingImages/IND_SPC_FLB100_IMG.jpg

FBL-100 is a film/foil laminate barrier material that is resistant to water, paint stripping chemicals, oils and grease. It is designed and engineered for use during chemical (paint) stripping of aircraft to provide vapor barrier protection.

PG57R

PG57R supports large kraft aprons and is ideal for aircraft, buses and heavy trucks. It is solvent resistant and can be SME-AMS-T-21595 certified.

BT100

PMB Blast Impact Tape for masking surfaces during dry strip paint removal or other shot-peen processes. Prevents small particles of blast media and other foreign debris from infiltrating and damaging sensitive surfaces, components and control systems. Tough rubber construction. Clean removal.

BT-100-R

Durable rubber construction, withstands “PMB”