For over fifty years, IPG® has been trusted by the transportation markets of repair and OEM businesses for Automotive, Marine, Aerospace and many others. Superior performance is the trademark of our Performance Product Line which is anchored by our masking tapes with support from a variety of specialty tapes and masking films that are technically designed for easy application and removal with clean results. Trust IPG® when it’s time to get moving.
PVC backed; rubber based; fine line masking tape; removes cleanly from a variety of surfaces when exposed to temperatures up to 250°F/120°C for at least 30 minutes

Fineline Masking Tape - Preferred for medium to high temperature applications where a sharp, fine line is required including composite and fiberglass (gelcoat) fabrication.

Anchor® brand Hand Mask is a pre- folded high density polyethylene masking film designed for multiple transportation applications. The thick and durable 12 micron film is treated to resist overspray flaking during paint applications. This special film is designed with a reinforced top edge formulated to prevent the underlying film from sticking.

PG20 is an aluminized silver, crepe backed painter's tape that removes cleanly up to 30 days after application even when exposed to high temperature and UV rays.

PT14 is a blue, pressure-sensitive masking tape designed for the most demanding professional painters. With its fine-structured crepe backing, it provides excellent paint lines, cornering, and unsurpassed conformability. This premium painters’ tape will remove cleanly for up to 14 days, even with direct exposure to sunlight and high humidity. Typical applications include outdoor masking of woodwork, glass and metal surfaces, and marine painting applications.

This green, coarse crepe backed painters' tape removes cleanly up to 8 days after application, even when exposed to direct sunlight.

Orange Mask
Orange Mask™ is a high performance masking tape developed for transportation related paint applications such as marine, bus, truck, RV, automotive and various other applications where conformability and clean removal is required. Crisp paint lines. UV resistant up to 72 hours. Tear, moisture and solvent resistant.
PS1 is a high strength flatback containing an adhesive to withstand temperature exposure up to 400°F/205°C
A paint contractor industry staple! Its high elongation will conform to most painting applications.
Black; vinyl; premium grade electrical tape; all weather; flame retardant; UL listed; great dielectric strength
Black; vinyl; general purpose electrical tape; electrical insulating; UL listed; good dielectric strength
This extremely versatile tape is resistant to strong solvents and paints and is easily removed in warm or cold environments. It is temperature resistant to 325°F/163°C.
Dead soft aluminum foil tape provides instant, water-resistant adhesion to clean/dry surfaces. Adheres well to itself (where overlapped) yet dispenses from the roll for easy application. Conforms to irregular/curved surfaces as it remains flexible and resists cracking and lifting. Masking for chemical paint stripping of aircrafts and use as an underlay for PMB Blast Tape (drystripping process). Also used for electroplating, heat reflection/dissipation and to seam and seal fiberglass duct board, sheet metal ductwork, and flexible duct wrap to enhance appearance and maintain vapor barrier integrity.
592 is a 6.0 mil double-coated crepe paper tape with a natural rubber/resin adhesive on an easy release treated white crepe liner. Ideal for the printing and textile industry, and certain splicing applications.
PG48 provides easy unwind for wide width and is resistant to solvents, paints and temperatures up to 325°F/163°C.
Along with good quick stick and holding properties, PG49 is resistant to strong solvents, paints and temperatures to 325°C/163°C.
Durable, moisture resistant PE backing with a rubber-based pressure-sensitive adhesive. Bonds well to a variety of surfaces. High degree of conformability without excessive stretch. UV resistant up to 6 months depending on conditions and surfaces.
Durable, moisture resistant PE (polyethylene) backing with a rubber-based pressure-sensitive adhesive. For patching, sealing, bundling, and wrapping. For splicing and surface protection. Available in red, blue, and white.