Aluminum Foil Tape

Introducing IPG's new, full line of Intertape brand aluminum foil tape products!

As an experienced tapes and films manufacturer, IPG applied this vast technological knowledge toward formulating the most clear and effective line of foil tape products designed to deliver consistency in quality, performance and value.
The Intertape line of aluminum foil tapes address the most significant application usage range within the industrial, HVAC, aerospace, appliance, and marine industries:

• Joining pipe insulation jackets
• Seaming fiberglass duct board
• Sealing insulation to create a vapor barrier
• Reflecting and dissipating both heat and light
• Patching sheet metal ductwork
• Protective masking during chemical paint stripping

Intertape aluminum foil tapes are engineered with an aggressive long lasting pressure-sensitive adhesive that demonstrates superior bonding when exposed to both sub-zero and elevated temperatures. The shiny, UV resistant foil backing offers an enhanced appearance, excellent reflective and flame retardant properties, and remains flexible to resist cracking and lifting around irregular or curved surfaces.

ALF-150L

http://intertapepolymer.com/PublishingImages/industrialnewcore/IND_DCT_GENPURPFOIL_IMG.jpg

Aluminum Foil for seaming and sealing fiberglass duct board and duct wrap to enhance appearance and maintain vapor barrier integrity. High tack rubber based adhesive. Recommended minimum application temperature 40ºF (4°C). The shiny aluminum backing offers excellent reflective properties (i.e. heat, light). For (limited) use also in Industrial, Appliance, Marine and Aerospace industries.

Backing	Adhesive	Total Thickness mils (mm)	Tensile Strength lbs/in (N/cm)	Adhesion to Steel oz/in (N/cm)	Elongation
1.5 mil Aluminum Foil	Synthetic Rubber/Resin	3.3mil (0.08mm)	18 (79 N/25mm)	175oz/in (48 N/25mm)	3%

ALF-200L

ALF-200L is engineered and designed for general purpose seaming, patching and sealing to enhance appearance and maintain vapor barrier integrity. The aggressive / long-lasting acrylic pressure-sensitive adhesive provides long-lasting adhesion to clean/dry surfaces. Flame retardant / High shear adhesion / UV resistant. Superior bonding when exposed to either sub-zero or elevated temperatures. Release coated kraft liner. For (limited) use in Industrial, Appliance, Marine and Aerospace industries. Can also be used as protective mask during chemical stripping of metals / other surfaces. Conforms to UL723.

Backing	Adhesive	Total Thickness mils (mm)	Tensile Strength lbs/in (N/cm)	Adhesion to Steel oz/in (N/cm)	Elongation
2.0 mil Aluminum Foil	Acrylic	4.6mil (0.117mm)	30 (131 N/25mm)	70 oz/in (19.2 N/25mm)	4%

ALF-300

Engineered to meet requirements for masking of aircraft surfaces during chemical paint stripping process. Aggressive acrylic pressure-sensitive adhesive provides instant, water-resistant adhesion to clean / dry surfaces. Adheres well to itself (where overlapped) yet dispenses from the roll for easy application. Remains flexible and resists cracking and lifting. Conforms to irregular / curved surfaces. Can also be used for electroplating, heat reflection/dissipation and to seam and seal fiberglass duct board, sheet metal ductwork, and flexible duct wrap to enhance appearance and maintain vapor barrier integrity. Recommended minimum application temperature: 35ºF. Also can be used for electroplating (of aluminum), HVAC (Heating, Ventilation, and Air Conditioning) and other Aerospace, Industrial, Marine and Appliance industry applications.

Backing	Adhesive	Total Thickness mils (mm)	Tensile Strength lbs/in (N/cm)	Adhesion to Steel oz/in (N/cm)	Elongation
3.0 Dead Soft Aluminum Foil	Acrylic	5.0 mil (0.127 mm)	28 (122.5 N/25mm)	55oz/in (15 N/25mm)	5.5%

ASJ-1

ASJ-1 is engineered for permanent joining, seaming and sealing of pipe insulation jackets, white FSK laminated blanket, duct board and flexible duct joints and seams to enhance appearance and maintain vapor barrier integrity. The aggressive / long-lasting acrylic pressure-sensitive adhesive provides long-lasting adhesion to clean/dry surfaces. All temperature rated / Flame retardant / High shear adhesion / UV resistant. Superior bonding when exposed to either sub-zero or elevated temperatures. Release coated kraft liner.

Backing	Adhesive	Total Thickness mils (mm)	Tensile Strength lbs/in (N/cm)	Adhesion to Steel oz/in (N/cm)	Elongation
ASJ (Type I ~ IV)	Acrylic	11.5 mil (0.29 mm)	57 (250 N/25mm)	>100 oz/in (27.4 N/25mm)	3%

FSK-1

FSK-1 is engineered to seam / seal FSK duct board and insulation to enhance appearance and maintain vapor barrier integrity. The aggressive / long-lasting acrylic pressure-sensitive adhesive provides long-lasting adhesion to clean/dry surfaces. Full bond within 24 hours. Remains flexible to resist cracking and lifting. Resistant to mold and mildew. Release coated kraft liner.

Backing	Adhesive	Total Thickness mils (mm)	Tensile Strength lbs/in (N/cm)	Adhesion to Steel oz/in (N/cm)	Elongation
FSK (Foil-Scrim-Kraft)	Acrylic	7.2 mil (0.183 mm)	43 (188 N/25mm)	>100 oz/in (27.4N/25mm)	2%

Foil Tape

This linered dead soft general purpose aluminum tape is designed for sealing joints and seams on foil against moisture.

Tensile		Adhesion		Thickness		Elongation
lb/in	N/25mm	oz/in	N/25mm	mils	mm	%
15.0	65.7	165.0	45.0	3.0	0.08	N/A

0802 Foil

0802 Foil tape is a linered dead soft aluminum tape designed for taping joints and seams on foil jacketing facings.

Tensile		Adhesion		Thickness		Elongation
lb/in	N/25mm	oz/in	N/25mm	mils	mm	%
N/A	N/A	126.0	34.5	4.0	0.28	N/A

UL181 Foil

UL181AP rated and meets SMCNA standard AFTS101-73. UL181 Foil is a linered flexible duct tape is used to tape and seal seams on fibrous boards in HVAC industry.

Tensile		Adhesion		Thickness		Elongation
lb/in	N/25mm	oz/in	N/25mm	mils	mm	%
25.0	109.0	60.0	16.4	4.7	0.12	N/A

FBL100

http://intertapepolymer.com/PublishingImages/IND_SPC_FLB100_IMG.jpg

FBL-100 is a film/foil laminate barrier material that is resistant to water, paint stripping chemicals, oils and grease. It is designed and engineered for use during chemical (paint) stripping of aircraft to provide vapor barrier protection.

Backing	Tensile Strength (lbs/in of width)	Puncture Resistance (lbs)	Total Thickness (mils)	Resistance to Curl	Water Vapor Transmission Rate
BOPP/Aluminum Foil/LDPE	50 (min)	15 (min)	4.8	5%	0.02 (max)

intertape polymer group