MONUMENT STENCIL PRODUCTS

111 http://intertapepolymer.com/PublishingImages/STN_MON111_IMG.jpg
Hand-cut, high quality, durable stencil coated with an advanced medium tack, rubber-based pressure-sensitive adhesive. Designed for superior shape carving in marble and granite. Unique rubber formula allows easy cutting with less frequent knife sharpening. Controlled shrinkage gives accurate panel replacement after frosting. Recommended for maximum depth glass etching. Use with #211 or #333 stencil filler.
 
116 http://intertapepolymer.com/PublishingImages/STN_MON116_IMG.jpg
Computer-cut, high quality, durable stencil coated with an advanced, high tack, water-based acrylic pressure-sensitive adhesive protected by a clear polyester liner. Designed for slot-hole pattern Gerber® 15” and 30” plotters. The 15” widths will also track accurately in IBM® –pattern and friction-fed cutters. Designed and recommended for raw/unfinished hardwood, HDU foam-board, brick, and rough stone. Not intended for use on marble, granite, or polished surfaces.
 
117 http://intertapepolymer.com/PublishingImages/STN_MON117_IMG.jpg
Computer-cut, high quality, durable stencil coated with an advanced, medium tack, rubber-based pressure-sensitive adhesive protected by a clear polyester liner. Designed for precision cutting in slot-hole pattern Gerber® 15” and 30” plotters. The 15” widths will also track accurately in IBM® pattern and friction-fed cutters. Designed and recommended for use on polished granite or marble, primed/painted wood, and HDU foam-board. Use with #211 or #333 stencil filler.
 
118 http://intertapepolymer.com/PublishingImages/STN_MON118_IMG.jpg
High quality, durable, rubber stencil formulated to be slightly harder than our standard rubber. Designed and recommended for hand-cut applications. However, it may work in some friction feed style plotters/cutters. for use on most types of stone (especially granite or marble). For optimum performance on stone, use with #211 or #223 stencil filler to enhance adhesion to stone during high pressure blasting.
122
Die-cut, high quality, durable stencil coated with an advanced medium tack, rubber-based, pressure-sensitive adhesive protected by a controlled-release, poly liner. Designed for precision die cutting in roller and press machines. Controlled-release liner maintains design alignment while removing plastic dies. Recommended for use on marble and granite.
123 http://intertapepolymer.com/PublishingImages/STN_MON123Y_IMG.jpg
Designed for precision die cutting in roller and press machines. Unique rubber formula allows easy cutting with less wear on dies. The specially treated polyester liner maintains design alignment following plastic die removal. Recommended for single-process shaped carving of marble and granite. Use with #223 or #333 stencil filler.
 
123Y http://intertapepolymer.com/PublishingImages/STN_MON123Y_IMGc.jpg
Product has a yellow 2 mil poly film liner between the adhesive and rubber layers as an aid in identifying and adhesive residue remaining after exposure to media blasting. Designed for precision die cutting in roller and press machines. Unique rubber formula allows easy cutting with less wear on dyes. The specially treated polyester liner maintains design alignment following plastic dye removal. Recommended for single-process shaped carving of marble and granite.
 
124 http://intertapepolymer.com/PublishingImages/STN_MON124Y_IMG.jpg
Designed for precision cutting in slot-hole pattern cutters. The tractor-feed holes are punched through both rubber and liner. The 15” width will track and process on both IBM® and Gerber® pattern cutters. The 30” width will fit only Gerber® #750 plotter machines. The inner sheet of polyester maintains alignment of cut designs during transfer from plotter to stone. Designed and recommended for single-process shaped carving on polished granite or marble.
 
124Y http://intertapepolymer.com/PublishingImages/STN_MON123Y_IMGc.jpg
Designed for precision cutting in slot-hole pattern cutters. The tractor-feed holes are punched through both rubber and liner. Designed and recommended for single-process shaped carving on polished granite or marble. Features a yellow 2 mil poly film between the adhesive and rubber layers as an aid in identifying any adhesive residue remaining after exposure to media blasting.
 
129Y http://intertapepolymer.com/PublishingImages/STN_MON129Y_IMGc.jpg
High quality, durable stencil designed for precision cutting IBM®-pattern cutters. The slot-hole pattern will also accurately track through Gerber® 15” and friction-feed plotters. Contains a yellow inner sheet of polyester which retains cut designs during liner removal. Recommended for single-process media blast carving of granite or marble. Use with #223 or #333 stencil filler.
 
129YEE http://intertapepolymer.com/PublishingImages/industrialnewcore/TAPE_STENCIL_129YEE_300X300-72.jpg
High quality, durable, stencil coated with an advanced medium tack, rubber-based, pressure-sensitive adhesive protected by a clear PET liner. Contains a yellow inner sheet of polyester which retains cut designs during liner removal. Product has rubber to the full width of liner to allow smoother tracking through certain types of high speed cutters vs. #129Y which has the rubber sheet trimmed ½” on each edge. Recommended for single or double process media blast carving of granite or marble.
154 http://intertapepolymer.com/PublishingImages/STN_MON124Y_IMG.jpg
Medium tack, light blue liner. High quality, conformable, durable stencil coated with an advanced rubber-based, pressure-sensitive adhesive. ½” on center hole pattern designed for IBM® sprockets. Tractor-feed holes are punched through liner and rubber. The specially treated polyester liner retains cut designs during transfer from plotter to stone. Recommended for single-process media blast carving of marble and granite.
 
154Y http://intertapepolymer.com/PublishingImages/STN_MON124Y_IMG.jpg
Medium tack, light blue liner. ½“ on center hole pattern designed for IBM® sprockets. Tractor-feed holes are punched through liner and rubber. The specially treated polyester liner retains cut designs during transfer from plotter to stone. Recommended for single-process media blast carving of marble and granite. Use with @223 or #333 stencil filler.
 
155 http://intertapepolymer.com/PublishingImages/STN_MON116_IMG.jpg
High quality, durable stencil coated with an advanced water-based, high tack acrylic adhesive protected by a clear polyester liner. Un-punched for friction-feed cutters and is designed for use on primed/painted wood and HDU foam-board. #155 is the friction-feed option for double-process shaped carving on polished marble or granite. It is recommended for media blasting or etching of glass.
 
192Y http://intertapepolymer.com/PublishingImages/STN_MON192Y_IMGc.jpg
High quality, durable stencil coated with an advanced medium tack, rubber-based, pressure-sensitive adhesive protected by a clear PET liner. Designed for precision cutting in IBM®-pattern cutters. The slot-hole pattern will also accurately track through Gerber® 15” and friction-feed plotters. Contains an inner sheet of polyester which retains cut designs during liner removal. Recommended for single process media blast carving of granite or marble.
 
211 Filler http://intertapepolymer.com/PublishingImages/industrialnewcore/TAPE_STENCIL_211FILLER_300X300-72.jpg
Most aggressive filler, works well with handcut stencil. Evens out the peaks and valleys of the substrate. Works with the stencil adhesive to create a bond to withstand 100-150 lbs or greater PSI and still remain bonded to the stone or substrate.
223 Filler http://intertapepolymer.com/PublishingImages/industrialnewcore/TAPE_STENCIL_223FILLER_300X300-72.jpg
Works with machine cut stencils and is least aggressive. Evens out the peaks and valleys of the substrate. Works with the stencil adhesive to create a bond to withstand 100-150 lbs or greater PSI and still remain bonded to the stone or substrate.
333 Filler http://intertapepolymer.com/PublishingImages/industrialnewcore/TAPE_STENCIL_333FILLER_300X300-72.jpg
Water washable and is good for the environment. OSHA approved. Evens out the peaks and valleys of the substrate. Works with the stencil adhesive to create a bond to withstand 100-150 lbs or greater PSI and still remain bonded to the stone or substrate.